Upgrade OSHA 10 to OSHA 30 (in English) - Bronx - $305 - (718) 734-8400
NYST Bronx
975 Kelly St, Bronx, NY 10459, USA
New York
40.822181
-73.89599599999997
Description
Upgrade OSHA 10 to OSHA 30-hour Construction Safety and Health
for only $305 online pre-registration price (plus processing fee)
$340 at-the-door price
THIS CLASS IS ONLY AVAILABLE for students who took the OSHA 10 Construction class WITH NYST less than 6 months before the end date of this class.
February - 4 class days:
Wednesdays and Fridays
4:00 PM - 9:30 PM
February 6, 8, 13, and 15
At our Bronx location: 975 Kelly Street, 4th Floor, Bronx, NY 10459
(2 or 5 train to Intervale Ave)
PRICE: $305 online pre-registration price (plus online processing fee). $340 if paying at the door.
Note about 10 hours of class: 10 hours of the OSHA 30 is the OSHA 10. OSHA regulations allow a student to "upgrade: their OSHA 10 to OSHA 30 on 2 conditions: All 30 hours of training are completed within 180 days (6 months) of each other and all training hours are completed with the same training company.
UPGRADE TICKET: If you have an NYST OSHA 10 dated LESS than 6 months before the END DATE of your OSHA 30, you can purchase a discounted UPGRADE ticket and skip the OSHA 10 portion of your OSHA 30. See description of class above for your altered class schedule.
REGULAR TICKET: If you have an NYST OSHA 10 from MORE than 6 months before the end of OSHA 30, you are eligible for the discounted UPGRADE ticket, but you must attend all 30 hours of class. If you do NOT have an OHSA 10 FROM NYST, you unfortunately cannot upgrade. You have to purchase full OSHA 30 ticket and attend all 30 hours of class.
975 Kelly Street, 4th Floor
Bronx, NY 10459
(2 or 5 train to Intervale Ave)
New York Safety and Training, Inc.A Veteran owned business. Ask about our discount pricing for U.S. military veterans.
LIKE us on Facebook: www.Facebook.com/NYSafetyandTraining
Visit our website: www.NYSafetyandTraining.com
30-Hour Construction Industry Outreach Training Program -- Designated Training Topics.
The 30-hour Construction Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. New York Safety and Training's course emphasizes hazard identification, avoidance, control, and prevention, not OSHA standards. Instructional time must be a minimum of 30 hours. OSHA mandates that the 30 hours of training be broken into 15 hours of mandatory topics, 12 hours of elective topics, and 3 hours of optional topics as follows:
Mandatory - 15 hours
Introduction to OSHA -- 2 hours.Covers workers' rights, employer responsibilities, and how to file a complaint. It includes helpful worker safety and health resources. It also provides samples of a weekly fatality and 3 catastrophe report, material data safety sheet, and the OSHA Log of Work-Related Injuries and Illnesses (OSHA Form 300).
Managing Safety and Health -- 2 hours. May include Injury and Illness Prevention Programs, job site inspections, accident prevention programs, management commitment and employee involvement, worksite analysis, hazard prevention and control, accident investigations, how to conduct safety meetings, and supervisory communication.
OSHA Focus Four Hazards -- 6 hours. Because most construction fatalities are caused by fall hazards, falls must be covered for a minimum of one hour and 15 minutes. The other focus four hazards must be covered for a minimum of one-half hour each. A trainer may spend up to 10 hours on this topic. (1) Falls (minimum one hour and 15 minutes) (2) Electrocution (3) Struck-By (e.g., falling objects, trucks, cranes) (4) Caught-In or Between (e.g., trench hazards, equipment)
Personal Protective and Lifesaving Equipment -- 2 hours.
Health Hazards in Construction -- 2 hours. May teach noise, hazard communication, and crystalline silica or any other construction health hazard.
Stairways and Ladders -- 1 hour.
Elective - 12 hours The instructor will teach at least 6 of the following topics:
Concrete and Masonry Construction
Confined Space Entry
Cranes, Derricks, Hoists, Elevators, & Conveyors
Ergonomics
Excavations
Fire Protection and Prevention
Materials Handling, Storage, Use and Disposal
Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades
Powered Industrial Vehicles
Safety and Health Programs
Scaffolds
Steel Erection
Tools - Hand and Power
Welding and Cutting
Optional - 3 hoursThe instructor will teach other construction industry hazards or policies and/or expand on the mandatory or elective topics.
This listing has no upcoming events
Start:
2019-02-06T16:00:00-05:00
End:
2019-02-15T21:30:00-05:00
This listing has no upcoming events
Start:
2018-11-14T16:00:00-05:00
End:
2018-11-30T21:30:00-05:00
This listing has no upcoming events
Start:
2018-10-17T16:00:00-04:00
End:
2018-10-26T21:30:00-04:00
This listing has no upcoming events
Start:
2018-09-12T16:00:00-04:00
End:
2018-09-21T21:30:00-04:00
This listing has no upcoming events
Start:
2018-04-25T16:00:00-04:00
End:
2018-05-04T21:30:00-04:00
This listing has no upcoming events
Start:
2018-02-21T16:00:00-05:00
End:
2018-03-02T21:30:00-05:00
Category
Other
Tickets
UPGRADE Discount Ticket (already have OSHA 10 from NYST less than 6 months prior)
305.0
USD
25